GIGA Film faced plywood

1.Resistant to water moisture 2.Re-use above 15 times 3. Preservation performance is good

GIGA Film faced plywood

  GIGA film faced plywood is suitable for outside high-end and high-rise construction and bridge construction.It’s large breadth make it able to reduce the quantity of seam and improve the working efficiency of membrane. Good water resistance,strength properties, high turnover times, long service life, easy mold release by only taking the time 1/7 of the steel mould ,no secondary wall plastering process, being able to directly cover the surface decoration, shortening the process time by 30%. It’s advantageous to winter construction for the excellent heat preservation performance.

1,The weight is light: Is suitable for the high-rise construction and the bridge construction.

2,The width is big: The maximum width for 2440×1220mm, reduces the joint quantity, raises the mold  working efficiency. 3, Does not warp, does not distort, does not crack, the water resistant performance to be good, the turnover number of times is high, the service life is long. 4,The drawing of patterns is easy, is only the steel die 1/7. 5, Makes the clear water concretes: Construction thing surface smooth artistic, subtracts the wall two  plastering crafts, but the direct cover decoration, reduces time 30%.6, Anti-corrosive: Does not pollute the concretes surface.7,The heat preservation performance is good, is advantageous to the winter construction. 8, May do changes the tune plane the template.

Size:  915x1830mm.1220x2440mm

Thickness: 12mm,13mm,13.5mm,14mm,15mm,16mm,17mm,18mm

Glue: WBP and Melamin

Core: Polar

Package

  

Technical Specification: 18mm full  poplar film faced plywood 

No.	Property		Unit	Test Method	Value of Test	Result
1	Moisture content		%	EN 322	6-12	Check out
2	Density		Kg/m3	EN323	530	Check out
3	Bonding quality	Bonding  quality	Mpa	EN314	Max: 1.40   Min: 0.75	Check out
		Damage rate	%		54%
4	Bending Modules of Elasticty	Longitudinal	Mpa	EN310	4180	Check out
		Lateral			4578
5	Bending Strength N/mm	Longitudinal	Mpa		40.25	Check out

 How to cut best 

Always clean and repair the formwork panels before storage. The formwork should then be stacked off the ground on level supports and under cover. Framed formwork panels should be stacked alternately face and back to back to avoid face damages by bolts etc. If panels are wet, do not allow them to dry too rapidly.Sealing of edges

Phenolic fabric film faced plywood edges are fully sealed at the factory and it is the most important that all edges remain sealed. To obtain full value from a phenolic fabric film faced sheet any recut edges should sealed as soon as possible with water proof paint.Cleaning and repair

To obtain full life, cleaning should be carried out immediately after each use. Phenolic fabric film faced plywood may be wiped with release agent or cleaned with water and stiffbrush .

GIGA Film faced plywood